• AR10 20" 6.5 CREEDMOOR & 18" 308 WIN DUAL CALIBER PRECISION RIFLE SYSTEM BURNT BRONZE

    $4,199.99 $4,099.99
    Free Shipping!

    AR10 20" 6.5 CREEDMOOR & 18" 308 WIN DUAL CALIBER PRECISION RIFLE SYSTEM BURNT BRONZE

     

     

     

    BILLET UPPER:

           US made in Scottsdale, Arizona

           T6061 billet

           1913 picatinny rail flat top-DPMS low spec rail height

           manufactured from solid block of billet aluminum

           BATTLE WORN BRONZE CERAKOTE

           slim profile shell deflector / forward assist

           308 WIN engraved dust cover 

           6.5 CREEDMOOR engraved dust cover on CREEDMOOR upper




    6.5 CREEDMOOR BARREL:

           20” MATCH GRADE straight fluted bull barrel

           0.936” Gas Block

           RIFLE length gas tube

           Straight fluted for maximum heat dissipation

           4150 STEEL 

           5/8x24 muzzle thread pitch

           1:8 TWIST

           M4 feed ramp

     

    308 WIN BARREL:

           18” MATCH GRADE HBAR barrel

           0.75” Gas Block

           MID LENGTH length gas tube

          4150 STEEL

           5/8x24 muzzle thread pitch

           1:10 TWIST

           M4 feed ramp

     




    6.5 CREEDMOOR HANDGUARD:

           15” Super slim Handguard

           MLOK SYSTEM with three sectional rails installed

           BATTLE WORN BRONZE CERAKOTE

           T-markings on top rail

           Ultra-Light weight

     

     

    308 WIN HANDGUARD:

           15” Super slim Handguard

           MLOK SYSTEM with three sectional rails installed

           BATTLE WORN BRONZE CERAKOTE 

           T-markings on top rail

           Ultra-Light weight

     

    BOLT CARRIER GROUP:

           Made for 7.62X51 / 308 Cal & 6.5 CREEDMOOR

           HPT/MPI Tested and Marked

           9310 Hardened Steel Bolt

           17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)

           8620 carrier and gas key.

           Hardened extractor S7 tool steel.

           The group comes fully assembled with properly torqued and staked gas key

           Made in the USA

    (One BCG is included with the AR10 package)




    6.5 CREEDMOOR MUZZLE BRAKE:

           TANKER style

           TOP ports for MUZZLE CLIMB REDUCTION

           SIDE ports for RECOIL REDUCTION

     

     

    308 WIN MUZZLE BRAKE:

           Slip over sleeve style

           side ports for recoil reduction

     

    BILLET LOWER RECEIVER:

           Machined from 7075-T6 aircraft grade billet aluminum

           Matte black hard-coat anodized per Mil 8625 Type 3 Class 2

           Precision broached magazine well with beveled feed lips

           Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors.

           Caliber marking of “Multi” so it can be used with many different caliber uppers

           Compatible with all standard AR-10/.308 components and magazines and most aftermarket parts — Made to DPMS spec

           Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower

           Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)

           BATTLE WORN BRONZE CERAKOTE

           Threaded bolt catch pin (Threaded hole and hardware)

           Integrated large opening “winter” trigger guard

           Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances

     

     

    ATC DROP IN TRIGGER:

           American Trigger Company 

           Flat Design

           Titanium nitride coating (gold)

           Adjustable trigger pull

     

     

     

     

     

    LUTHAR MBA3 STOCK:

           Fully adjustable carbine buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – this is our carbine stock

           additional 1″ height on cheek rest

           3-axis adjustable butt plate assembly extends additional 1 1/16″ length of pull and includes the following movement:

    1.     horizontal for linear adjustment (i.e. length of pull)

    2.     vertical for a perfect butt plate fit into the curvature of the shoulder.

    3.     lateral adjustment for a ½ inch left or right cast

    4.     this butt plate assembly is interchangeable with the original mba-1 buttstock

           Includes a picatinny rail on the bottom rear of the stock body to attach your choice of many accessories.

           Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. this also allows you to secure the stock in your favorite position.

           The black mba-3 comes with a medium soft rubber recoil pad, duro 85.

           The LUTHAR mba-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.

           Fits all .223 and most .308 AR carbine style rifles

           Super strong glass filled nylon

           Easy to replace and quick to install

           Uses 4 out of the 6 positions on a mil-spec or commercial tube

     

    FEATURES:

           ergonomic

           adapts to existing commercial and mil-spec buffer tubes

           certain aftermarket commercial buffer tubes that exceed 1.172″ may not fit

           the vertical struts for the MBA 3 are fixed therefore the cheek pc is not reversible like the MBA 1 however the cheek piece itself is designed with a cheek pad for the lefty

     

    44” Flight Case:

     

    • Made from tough light-weight polypropylene copolymer

    • Has a rugged o-ring seal that makes it air and water tight up to 3ft deep

    • Custom laser cut foam to hold all components fo the system firm in place and provide maximum protection. 

    • Utilize an automatic pressure release valve so that it adjusts to its environment

    • ATA/TSA ready for airline travel

    • Lockable with comfort molded handles and spring loaded latches

    • include heavy-duty off-road wheels and a second handle. 

    • Made in the USA

     

    Vortex Crossfire II 3-24x50 Scope:

     

    OPTICAL FEATURES:

    • Fully Multi-Coated Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.

    • Second Focal Plane Reticle Scale of reticle maintains the same ideally-sized appearance. Listed reticle sub tensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification.

    • Illuminated Center Dot Provides a precise aiming point under low-light conditions.

    CONSTRUCTION FEATURES:

    • Tube Size 30 mm diameter.

    • Single-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness.

    • Aircraft-Grade Aluminum Constructed from a solid block of aircraft-grade aluminum for strength and rigidity.

    • Waterproof O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments.

    • Fog-proof Nitrogen gas purging prevents internal fogging over a wide range of temperatures.

    • Shockproof Rugged construction withstands recoil and impact.

    • Hard Anodized Finish Highly durable low-glare matte finish helps camouflage the shooter's position.

    • Capped Reset Turrets Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret.

    • Adjustable Objective Adjustment for riflescope's objective lens provides image focus and parallax removal.

     

    SPECIFICATIONS:

    • Magnification 3-24x

    • Objective Lens Diameter 50 mm

    • Eye Relief 3.5 inches

    • Field of View 36.7-9.2 feet/100 yards

    • Tube Size 30 mm

    • Turret Style Capped

    • Adjustment Graduation 1/4 MOA

    • Travel per Rotation 15 MOA

    • Max Elevation Adjustment 60 MOA

    • Max Windage Adjustment 60 MOA

    • Parallax Setting 10 yards to infinity

    • Length 14.3 inches

    • Weight 21.1 ounces

    Comes with one piece quick detach picatinny mount pre-installed 

     

     

     

    ADDITIONAL INCLUDED PARTS:

     

    • ADJUSTABLE 6”-9” BIPOD WITH QUICK DETACH PICATINNY MOUNT 

    • 2 X 10 ROUND PMAG 

     

     

     

     WARRANTY:

     

    This firearm is covered by our lifetime warranty, please read full warranty statement for further details. 

     


    Please email your local FFL information to sales@tacticalskeleton.com after placing your order.

    Reviews

    Tactical Skeleton is a BBB Accredited Gun Dealer in Grand Prairie, TX