- Description
- Reviews
BILLET NON-RECIPROCATING SIDE CHARGER UPPER:
· USA MADE
· T6061 billet
· Manufactured from solid block of billet aluminum
· Mil-a-8625 type iii anodizing
· Slim profile shell deflector / forward assist
· NON-RECIPROCATING SIDE CHARGER
8.6 BLACKOUT BARREL:
- Barrel Material: 4150 CMV
- Rifling: Button
- Barrel Caliber: 8.6 BLK
- Barrel Twist: 1:3
- Barrel Length: 16"
- Barrel Profile: Big Gunner
- Barrel Gas System: Carbine
- Inside Finish: Salt Bath Nitride
- Outside Finish: Salt Bath Nitride
- Muzzle Thread: M18x1.5, tapered shoulder (adapter included)
- Gas Block Diameter: .875"
- Gas Block Journal Length: 1.9"
- Barrel Extension: Standard DPMS Gen 1 .308 Extension, Black Oxide
- Weight: 2.2 lbs
- Magnetic Particle Inspected
- 11° Target Crown
.277 Fury Barrel (16")
- Material: 4150 CMV Steel
- Twist Rate: 1:7, optimized for .277 fury
- Gas System: Mid-length
- Profile: Big Gunner
- Finish: nitride
- Muzzle Thread: 5/8x24
- Gas Block Diameter: .75"
- Magnetic Particle Inspected for quality assurance
FLOW Range 36 Ti
The FLOW Range 36 Ti is the ultimate choice for versatility. It's perfect for first-time suppressor buyers or anyone seeking a single, all-purpose suppressor. This extremely lightweight, multi-caliber suppressor features hybridized Flow-Through technology, offering superior performance across various platforms. Its enhanced GeoFlash Cap with extended lugs makes installation and removal hassle-free. The suppressor is fully optimized for pistols, rifles, PCCs, and sub-guns, ensuring optimal performance in every application. Crafted from high-quality Grade 5 titanium and fully 3D-printed, the FLOW Range 36 Ti is built to last. Its design also incorporates stiction mounting and hub adapter capability, further enhancing its versatility. The FLOW Range 36 Ti is fully-auto rated and has no barrel restrictions. No modifications to the platform or gas system are required to install or operate this suppressor.
HANDGUARDS:
· 12” Super slim profile / US MADE
· MLOK SYSTEM
· Ultra-Light weight
CRYHAVOC QUICK RELEASE BARREL SYSTEM:
While the QRB was primarily designed for the civilian market, non-civilian applications range from the Air Force using the QRB on the Air Crew Survival Weapon (GAU-5A) for ALL Fighters and Bombers, Motorcycle Police who did not have room for a standard AR-15/M4, to Operators in areas where an exposed AR-15/M4 might bring unwanted attention. In these and other cases, where there is a need for an AR-15/M4, the QRB now makes it possible to fit a rifle into a tight space but still have a usable barrel length for increased velocity!
The QRB is able to retain POA/POI as the barrel still "head-spaces" off the stock positions (our tests have shown accuracy retained to less than 1 MOA of original rifle setup!).
BOLT CARRIER GROUP:
· Made for 7.62X51 / 308 Cal & 6.5 CREEDMOOR
· 9310 Hardened Steel Bolt
· 17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)
· Hardened extractor S7 tool steel.
· The group comes fully assembled with properly torqued and staked gas key
BILLET GEN2 TS10 LOWER RECEIVER:
· Machined from 7075-T6 aircraft grade billet aluminum
· Caliber marking of “Multi” so it can be used with many different caliber uppers
· Made to DPMS spec
· Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower
· Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)
· Integrated large opening “winter” trigger guard
· Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances
TRIGGER:
RISE ARMAMENT RA-434 3.5 LBS SINGLE STAGE
HOGUE RUBBERIZED PISTOL GRIP
MAGPUL ACS STOCK:
The Magpul ACS (Adaptable Carbine/Storage) - Mil-Spec model is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options.
Similar to the Magpul CTR®, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and accuracy*. The ACS comes standard with a 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in the USA.
Vortex TORQUE TOOL
Vortex STRIKE EAGLE 1-8X24 FFP Scope:
The Strike Eagle 1-8x24 FFP gives you the accurate holdovers at any magnification you've been looking for in an LPVO, allowing you to dominate close quarters and stretch your effective range.
FEATURES
OPTICAL FEATURES
- Illuminated Reticle - Provides precise aiming under low-light conditions
- Fully Multi-Coated - Increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.
- First Focal Plane Reticle - Scale of reticle remains in proportion to the zoomed image. Constant subtensions allow accurate holdover and ranging at all magnifications.
- Glass-Etched Reticle - Allows for intricate reticle design. Protected between two layers of glass for optimum durability and reliability
CONSTRUCTION FEATURES
- ArmorTek - Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt.
- Shockproof - Rugged construction withstands recoil and impact.
- Waterproof - O-ring seals prevent moisture, dust and debris from penetrating the scope for reliable performance in all environments.
- Fogproof - Nitrogen gas purging prevents internal fogging over a wide range of temperatures.
- Low-Glare Matte Black Anodized - Corrosion and wear resistant anodization provides low-glare matte surface and helps camouflage the shooter's position.
- Aircraft-Grade Aluminum - Constructed from a solid block of aircraft-grade aluminum for strength and rigidity.
- Single-Piece Tube - Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness.
CONVENIENCE FEATURES
- Fast Focus Eyepiece - Allows quick and easy reticle focusing.
- Throw Lever - The included throw lever can be installed for quick and easy magnification adjustments.
SPECIFICATIONS
- Magnification - 1-8x
- Objective Lens Diameter - 24 mm
- Eye Relief - 3.9 inches
- Field of View - 113.6-14.1 ft/100 yds
- Tube Size - 30 mm
- Turret Style - Capped
- Adjustment Graduation - 1/4 MOA
- Travel Per Rotation - 25 MOA
- Max Elevation Adjustment - 145 MOA
- Max Windage Adjustment - 145 MOA
- Parallax Setting - 125 yds
- Length - 10.4 inches
- Weight - 23.9 oz
RETICLE
EBR-8 RETICLE – Our exclusive EBR-8 MOA first focal plane, glass-etched, illuminated reticle facilitates rapid shooting from point blank out to 600 yards with popular .223/5.56mm and .308/7.62mm loads. This reticle also can be used with a wide variety of other calibers and loads using the BDC hashmarks.
VORTEX, CM-404, PRECISION QR EXTENDED CANTILEVER MOUNT – 30mm 2” offset
ATLAS BT46 LW17 BIPOD W/ QD
VORTEX TORQUE TOOL
PELICAN IM3200 FLIGHT CASE WITH WHEELS
CUSTOM LASER CUT AND ENGRAVED HEAVY DUTY CLOSED CELL FOAM INSERTS
CUSTOM CARLSBAD TRIPLE CAMO CERAKOTE (BURNTBRONZE X MIDNIGHT BRONZE X BLACK)
ADDITIONAL INCLUDED PARTS:
· 2 X 20 ROUND MAGPUL PMAG MAGAZINES
WARRANTY:
This firearm is covered by our lifetime warranty, please read full warranty statement for further details.