20" 6.5 CREEDMOOR & 20" 308 WIN CUSTOM DPMS AR10 SYSTEM GEN 2 BURNT BRONZE

Free shipping
$4,099.99 $3,999.99
  • Description
  • Reviews (2)
BILLET UPPER
  • US made 
  • T6061 billet
  • 1913 picatinny rail flat top-DPMS low spec rail height
  • manufactured from solid block of billet aluminum
  • BURNT BRONZE CERAKOTE
  • slim profile shell deflector / forward assist
  • 308 WIN engraved dust cover
  • 6.5 CREEDMOOR engraved dust cover on CREEDMOOR upper
6.5 CREEDMOOR BARREL
  • 20” MATCH GRADE  heavy bull barrel
  • 0.936” Gas Block
  • RIFLE length gas tube
  • Straight fluted for maximum heat dissipation
  • 4150 STEEL
  • 5/8x24 muzzle thread pitch
  • 1:8 TWIST
  • M4 feed ramp
308 WIN BARREL
  • 18” MATCH GRADE heavy HBAR barrel
  • 0.75” Gas Block
  • MID LENGTH length gas tube
  • 4150 STEEL
  • 5/8x24 muzzle thread pitch
  • 1:10 TWIST
  • M4 feed ramp
6.5 CREEDMOOR HANDGUARD
  • 15” Super slim Handguard
  • MLOK SYSTEM with three sectional rails installed
  • BURNT BRONZE CERAKOTE
  • T-markings on top rail
  • Ultra-Light weight
308 WIN HANDGUARD
  • 15” Super slim Handguard
  • MLOK SYSTEM with three sectional rails installed
  • BURNT BRONZE CERAKOTE
  • T-markings on top rail
  • Ultra-Light weight
BOLT CARRIER GROUP:
  • Made for 7.62X51 / 308 Cal & 6.5 CREEDMOOR
  • HPT/MPI Tested and Marked
  • 9310 Hardened Steel Bolt
  • 17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)
  • 8620 carrier and gas key
  • Hardened extractor S7 tool steel
  • The group comes fully assembled with properly torqued and staked gas key
  • Made in the USA

(One BCG is included with the AR10 package)

6.5 CREEDMOOR MUZZLE BRAKE
  • TANKER style
  • TOP ports for MUZZLE CLIMB REDUCTION
  • SIDE ports for RECOIL REDUCTION
308 WIN MUZZLE BRAKE
  • Slip over sleeve style
  • side ports for recoil reduction
BILLET LOWER RECEIVER
  • Machined from 7075-T6 aircraft grade billet aluminum
  • Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
  • Precision broached magazine well with beveled feed lips
  • Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors.
  • Caliber marking of “Multi” so it can be used with many different caliber uppers
  • Compatible with all standard AR-10/.308 components and magazines and most aftermarket parts — Made to DPMS spec
  • Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower
  • Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)
  • BURNT BRONZE CERAKOTE
  • Threaded bolt catch pin (Threaded hole and hardware)
  • Integrated large opening “winter” trigger guard
  • Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances
ATC DROP IN TRIGGER
  • American Trigger Company
  • Flat Design
  • Titanium nitride coating (gold)
  • Adjustable trigger pull
LUTHAR MBA3 STOCK
  • Fully adjustable carbine buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – this is our carbine stock
  • additional 1″ height on cheek rest
  • 3-axis adjustable butt plate assembly extends additional 1 1/16″ length of pull and includes the following movement:
    1. horizontal for linear adjustment (i.e. length of pull)
    2. vertical for a perfect butt plate fit into the curvature of the shoulder.
    3. lateral adjustment for a ½ inch left or right cast
    4. this butt plate assembly is interchangeable with the original mba-1 buttstock
  • Includes a picatinny rail on the bottom rear of the stock body to attach your choice of many accessories
  • Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. this also allows you to secure the stock in your favorite position
  • The black mba-3 comes with a medium soft rubber recoil pad, duro 85
  • The LUTHAR mba-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces
  • Fits all .223 and most .308 AR carbine style rifles
  • Super strong glass filled nylon
  • Easy to replace and quick to install
  • Uses 4 out of the 6 positions on a mil-spec or commercial tube
FEATURES
  • ergonomic
  • adapts to existing commercial and mil-spec buffer tubes
  • certain aftermarket commercial buffer tubes that exceed 1.172″ may not fit
  • the vertical struts for the MBA 3 are fixed therefore the cheek pc is not reversible like the MBA 1 however the cheek piece itself is designed with a cheek pad for the lefty
44” Flight Case
  • Made from tough light-weight polypropylene copolymer
  • Has a rugged o-ring seal that makes it air and water tight up to 3ft deep
  • Custom laser cut foam to hold all components of the system firm in place and provide maximum protection.
  • Utilize an automatic pressure release valve so that it adjusts to its environment
  • ATA/TSA ready for airline travel
  • Lockable with comfort molded handles and spring loaded latches
  • include heavy-duty off-road wheels and a second handle. 
  • Made in the USA
Vortex Crossfire II 3-24x50 Scope:

OPTICAL FEATURES

  • Fully Multi-Coated Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces
  • Second Focal Plane Reticle:  Scale of reticle maintains the same ideally-sized appearance. Listed reticle sub tensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification
  • Illuminated Center Dot Provides a precise aiming point under low-light conditions

CONSTRUCTION FEATURES

  • Tube Size:  30 mm diameter
  • Single-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness
  • Aircraft-Grade Aluminum:  Constructed from a solid block of aircraft-grade aluminum for strength and rigidity
  • Waterproof O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments
  • Fog-proof  Nitrogen gas purging prevents internal fogging over a wide range of temperatures
  • Shockproof Rugged construction withstands recoil and impact
  • Hard Anodized Finish:  Highly durable low-glare matte finish helps camouflage the shooter's position
  • Capped Reset Turrets:  Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret
  • Adjustable Objective:  Adjustment for riflescope's objective lens provides image focus and parallax removal
SPECIFICATIONS
Magnification3-24x
Objective Lens Diameter50 mm
Eye Relief3.5 inches
Field of View36.7-9.2 feet/100 yards
Tube Size30 mm
Turret StyleCapped
Adjustment Graduation1/4 MOA
Travel per Rotation15 MOA
Max Elevation Adjustment60 MOA
Max Windage Adjustment60 MOA
Parallax Setting10 yards to infinity
Length14.3 inches
Weight21.1 ounces

Comes with one piece quick detach picatinny mount pre-installed

ADDITIONAL INCLUDED PARTS
  • ADJUSTABLE 6”-9” BIPOD WITH QUICK DETACH PICATINNY MOUNT
  • 2 X 10 ROUND PMAG
WARRANTY

This firearm is covered by our lifetime warranty, please read full warranty statement for further details. 

Please email your local FFL information to shipping@tacticalskeleton.com after placing your order.

Coming soon...
Similar products
Copyright © 2022 Tactical Skeleton
payment-options