• AR15 20" 6.5 GRENDEL & 20" 223 WYLDE STAINLESS DUAL CALIBER PRECISION RIFLE SYSTEM

    $3,399.99 $3,299.99
    Free Shipping!
    please type YES

    PLEASE REVIEW THE FAQ PAGE BEFORE PURCHASING.

    BILLET UPPER:

           US made in USA

           T6061 billet

           1913 picatinny rail flat top-DPMS low spec rail height

           mil-a-8625 type iii anodizing

           223 WYLDE engraved dust cover 

           6.5 GRENDEL engraved dust cover 




    6.5 GRENDEL BARREL:

           20” MATCH GRADE STAINLESS HBAR barrel

           RIFLE length gas tube

           Straight fluted for maximum heat dissipation

           416R SS / CHROME LINED

           5/8x24 muzzle thread pitch

           1:8 TWIST

           M4 feed ramp

     

    223 WYLDE BARREL:

           20” MATCH GRADE HBAR barrel

           RIFLE length gas tube

           416R SS / CHROME LINED

           5/8x24 muzzle thread pitch

           1:8 TWIST

           M4 feed ramp

     




    HANDGUARD:

           15” MILSPEC SKELETON Handguard

           KEYMOD SYSTEM with three sectional rails installed

           ULTRA LIGHT WEIGHT

           4 X QD SLING MOUNTING POINTS

     

     

     

    BOLT CARRIER GROUPS:

           HPT/MPI Tested and Marked

           9310 Hardened Steel Bolt

           NICKEL BORON COATING

           17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)

           8620 carrier and gas key.

           Hardened extractor S7 tool steel.

           The group comes fully assembled with properly torqued and staked gas key

           Made in the USA

    (TWO BCGs ARE included with the AR15 SYSTEM, ONE PER CALIBER)

    2 X AMBI CHARGING HANDLES INCLUDED WITH EACH UPPER + 1 EXTRA  




    MUZZLE DEVICE:

           CROWN SS style

           side ports for recoil reduction

     

     

    BILLET LOWER RECEIVER:

           Machined from 7075-T6 aircraft grade billet aluminum

           Matte black hard-coat anodized per Mil 8625 Type 3 Class 2

           Precision broached magazine well with beveled feed lips

           Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors.

           Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower

           Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)

           Compatible with Norgon and other aftermarket ambidextrous mag releases

           Threaded bolt catch pin (Threaded hole and hardware)

           Integrated large opening “winter” trigger guard

           Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances

     

    TRIGGER:

           standard milspec trigger

    LUTHAR BLACK MBA3 STOCK:

           Fully adjustable carbine buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – this is our carbine stock

           additional 1″ height on cheek rest

           3-axis adjustable butt plate assembly extends additional 1 1/16″ length of pull and includes the following movement:

    1.     horizontal for linear adjustment (i.e. length of pull)

    2.     vertical for a perfect butt plate fit into the curvature of the shoulder.

    3.     lateral adjustment for a ½ inch left or right cast

    4.     this butt plate assembly is interchangeable with the original mba-1 buttstock

           Includes a picatinny rail on the bottom rear of the stock body to attach your choice of many accessories.

           Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. this also allows you to secure the stock in your favorite position.

           The black mba-3 comes with a medium soft rubber recoil pad, duro 85.

           The LUTHAR mba-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.

           Fits all .223 and most .308 AR carbine style rifles

           Super strong glass filled nylon

           Easy to replace and quick to install

           Uses 4 out of the 6 positions on a mil-spec or commercial tube

     

    FEATURES:

           ergonomic

           adapts to existing commercial and mil-spec buffer tubes

           certain aftermarket commercial buffer tubes that exceed 1.172″ may not fit

           the vertical struts for the MBA 3 are fixed therefore the cheek pc is not reversible like the MBA 1 however the cheek piece itself is designed with a cheek pad for the lefty

     

    44” BLACK Flight Case:

     

    • Made from tough light-weight polypropylene copolymer

    • Has a rugged o-ring seal that makes it air and water tight up to 3ft deep

    • Custom laser cut foam to hold all components fo the system firm in place and provide maximum protection. 

    • Utilize an automatic pressure release valve so that it adjusts to its environment

    • ATA/TSA ready for airline travel

    • Lockable with comfort molded handles and spring-loaded latches

    • include heavy-duty off-road wheels and a second handle. 

    • Made in the USA

     

    Vortex Crossfire II 3-24x56 Scope:

     

    OPTICAL FEATURES:

    • Fully Multi-Coated Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.

    • Second Focal Plane Reticle Scale of reticle maintains the same ideally-sized appearance. Listed reticle sub tensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification.

    • Illuminated Center Dot Provides a precise aiming point under low-light conditions.

    CONSTRUCTION FEATURES:

    • Tube Size 30 mm diameter.

    • Single-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness.

    • Aircraft-Grade Aluminum Constructed from a solid block of aircraft-grade aluminum for strength and rigidity.

    • Waterproof O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments.

    • Fog-proof Nitrogen gas purging prevents internal fogging over a wide range of temperatures.

    • Shockproof Rugged construction withstands recoil and impact.

    • Hard Anodized Finish Highly durable low-glare matte finish helps camouflage the shooter's position.

    • Capped Reset Turrets Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret.

    • Adjustable Objective Adjustment for riflescope's objective lens provides image focus and parallax removal.

     

    SPECIFICATIONS:

    • Magnification 3-12 x

    • Objective Lens Diameter 56 mm

    • Eye Relief 3.5 inches

    • Field of View 36.7-9.2 feet/100 yards

    • Tube Size 30 mm

    • Turret Style Capped

    • Adjustment Graduation 1/4 MOA

    • Travel per Rotation 15 MOA

    • Max Elevation Adjustment 60 MOA

    • Max Windage Adjustment 60 MOA

    • Parallax Setting 10 yards to infinity

    • Length 14.3 inches

    • Weight 21.1 ounces

    Comes with one piece quick detach picatinny mount pre-installed 

     

     

     

    ADDITIONAL INCLUDED PARTS:

     

    • ADJUSTABLE 6”-9” BIPOD WITH QUICK DETACH PICATINNY MOUNT 

    • 2 X 10 ROUND PMAG 

     

     

     

     WARRANTY:

     

    This firearm is covered by our lifetime warranty, please read full warranty statement for further details. 



     We use a STOCK PHOTO for all builds: meaning the pictures we use do represent the actual firearm. (All builds may vary slightly based on parts availability but this is not usually the case item typically exactly as pictured.) 

    All firearms are pictures of an Actual Gun! 

    Our Experienced Staff Has Visually Inspected This Firearm & tested each firearm. 

     

     

     

     

    Please email your local FFL information to shipping@tacticalskeleton.com after placing your order.

     

    Reviews

    Tactical Skeleton is a BBB Accredited Gun Dealer in Grand Prairie, TX