• AR10 12 GAUGE Shotgun AND 308 WIN Pistol Package

    $6,199.99 $5,999.99
    please type YES

    10.5" GEN-12 UPPER:

    ·         The GEN12 was not the 1st "AR shotgun", but it is the first to use a standard 308 lower. The GEN12 upper was specifically designed to matte to any DPMS GEN1 308 Lower or other 308 lowers sharing the same pattern. The GEN12 upper will work with either the shorter DPMS buffer tube or the longer Armalite AR10/ 308 tubes. The center of the upper is the short recoil system which cycles the action. This means there is no gas tube or piston. The cyclic rate can be tuned by adjusting buffer weights and springs by the end user.

    ·         The upper will cycle bird shot or magnums and most everything in between. It reliably feeds both 2 ¾” shells and 3” shells on a standard short DPMS 308 buffer and spring. However we recommend a H3 buffer or a Hydraulic buffer when shooting magnums or any 3”8


    8.25" AR-10 308 BILLET SIDE CHARGING UPPER

     BILLET UPPER:

    ·         Machined from 6061 billet aluminum

    ·         Matte black hard coat anodized per Mil 8625 Type 3 Class 2

    ·         Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances



    BARREL:

    ·       8.25” stainless steel bull barrel

    ·       0.75” Stainless Gas Block

    ·       PISTOL Length gas tube

    ·       5/8x24 muzzle thread pitch

    ·       1:10 TWIST

    ·       M4 feed ramp


    HANDGUARD:

    ·     10” Super slim MLOCK Handguard

    ·       Steel Barrel nut

    ·       Anodized

    ·       T-markings on top rail

    ·       Ultra-Light weight

     

    BOLT CARRIER GROUP:

    ·       Made for 7.62X51 / 308 Cal

    ·      Black Nitride

    ·       HPT/MPI Tested and Marked

    ·       9310 Hardened Steel Bolt

    ·       17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)

    ·       8620 carrier and gas key.

    ·       Hardened extractor S7 tool steel.

    ·       The group comes fully assembled with properly torqued and staked gas key

    ·       Made in the USA


    MUZZLE BRAKE:

    • ·         Solid T6 Aluminum Body

    • ·         Pushes Flash Forward

    • ·         O.D Is 1.245″

    • ·         5/8 X 24 Thread

    • ·         Great For Use On AR-15 Pistols

    • ·         Fits Into Most Slimline Thin Free Floating Handguards

    • ·         .308/ 300 AAC Blackout Cal
    • ·         Micro Version

    • BILLET LOWER RECEIVER:

    ·       Machined from 7075-T6 aircraft grade billet aluminum

    ·       Matte black hard-coat anodized per Mil 8625 Type 3 Class 2

    ·       Precision broached magazine well with beveled feed lips

    ·       Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors.

    ·       Caliber marking of “Multi” so it can be used with many different caliber uppers

    ·       Compatible with all standard AR-10/.308 components and magazines and most aftermarket parts — Made to DPMS spec

    ·       Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower

    ·       Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)

    ·       Compatible with Norgon and other aftermarket ambidextrous mag releases

    ·       Threaded bolt catch pin (Threaded hole and hardware)

    ·       Integrated large opening “winter” trigger guard

    ·       Manufactured to MILSPEC on state of the art CNC equipment for consistent quality parts and exacting tolerances

     

    TRIGGER:

    ·       standard milspec trigger

     

     SB TACTICAL SBA3 BRACE:

    PRODUCT DESCRIPTION

    Designed for all platforms capable of accepting a mil-spec carbine receiver extension, the SBA3™ is 5-position adjustable, dramatically enhances versatility, and features a minimalist design with an integral, ambidextrous QD sling socket.

    Features

    ·         Minimalist design

    ·         5-position adjustable

    ·         Includes 7075 mil-spec carbine receiver extension

    ·         Integral, ambidextrous QD sling socket

    ·         US veteran designed and proudly made in the USA

    ·         Product includes:  brace, mil-spec carbine receiver extension, adjustable nylon strap

     

    HOGUE PISTOL GRIP:

    ·       This Hogue AR-15 Pistol Grip is constructed from a sturdy fiberglass and then over-molded with soft rubber for Hogue's famous durable, comfortable and secure grip. Fits firearms with standard righthand safeties only, will not fit firearms with an ambidextrous safety. Features a cobblestone finish, finger grooves, beavertail and dual palm swells for ease of handling and comfort in all situations. Mounting hardware not included

     

    ·       Ships with 42” hard-case

     

    CUSTOM BUILT TO ORDER

    PLEASE SEND YOUR FFL INFORMATION TO SHIPPING@TACTICALSKELETON.COM

     

    Reviews