• AR10 20" 6.5 CREEDMOOR & 18" 308 WIN DUAL CALIBER NON-RECIPROCATING SIDE CHARGER ENHANCED PRECISION RIFLE SYSTEM COYOTE TAN

    $5,499.99 $4,999.99

    AR10 20" 6.5 CREEDMOOR & 18" 308 WIN DUAL CALIBER NON-RECIPROCATING SIDE CHARGER ENHANCED PRECISION RIFLE SYSTEM COYOTE TAN

     

     

     

    BILLET UPPER:

    ∙       NON-RECIPROCATING SIDE CHARGER 

    ∙       T6061 billet

    ∙       1913 picatinny rail flat top-DPMS low spec rail height

    ∙       manufactured from solid block of billet aluminum

    ∙       slim profile shell deflector / forward assist




    6.5 CREEDMOOR BARREL:

    ∙       20” MATCH GRADE straight fluted bull barrel

    ∙       0.936” Gas Block

    ∙       RIFLE length gas tube

    ∙       4150 STEEL 

    ∙       5/8x24 muzzle thread pitch

    ∙       1:8 TWIST

    ∙       M4 feed ramp

     

    308 WIN BARREL:

    ∙       18” MATCH GRADE HBAR barrel

    ∙       0.75” Gas Block

    ∙       MID LENGTH length gas tube

    ∙      4150 STEEL

    ∙       5/8x24 muzzle thread pitch

    ∙       1:10 TWIST

    ∙       M4 feed ramp

     




    6.5 CREEDMOOR HANDGUARD:

    ∙       15” Super slim Handguard

    ∙       MLOK SYSTEM with three sectional rails installed

    ∙       T-markings on top rail

    ∙       Ultra-Light weight

     

     

    308 WIN HANDGUARD:

    ∙       15” Super slim Handguard

    ∙       MLOK SYSTEM with three sectional rails installed

    ∙       T-markings on top rail

    ∙       Ultra-Light weight

     

    BOLT CARRIER GROUP:

    ∙       Made for 7.62X51 / 308 Cal & 6.5 CREEDMOOR

    ∙       HPT/MPI Tested and Marked

    ∙       9310 Hardened Steel Bolt

    ∙       17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)

    ∙       8620 carrier and gas key.

    ∙       Hardened extractor S7 tool steel.

    ∙       The group comes fully assembled with properly torqued and staked gas key

    ∙       Made in the USA

    (One BCG is included with the AR10 package)




    6.5 CREEDMOOR MUZZLE BRAKE:

    ∙       TANKER style

    ∙       TOP ports for MUZZLE CLIMB REDUCTION

    ∙       SIDE ports for RECOIL REDUCTION

     

     

    308 WIN MUZZLE BRAKE:

    ∙       Slip over sleeve style

    ∙       side ports for recoil reduction

     

    BILLET LOWER RECEIVER:

    ∙       Machined from 7075-T6 aircraft grade billet aluminum

    ∙       Matte black hard-coat anodized per Mil 8625 Type 3 Class 2

    ∙       Precision broached magazine well with beveled feed lips

    ∙       Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors.

    ∙       Caliber marking of “Multi” so it can be used with many different caliber uppers

    ∙       Compatible with all standard AR-10/.308 components and magazines and most aftermarket parts — Made to DPMS spec

    ∙       Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower

    ∙       Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)

    ∙       Threaded bolt catch pin (Threaded hole and hardware)

    ∙       Integrated large opening “winter” trigger guard

    ∙       Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances

     

     

    RISE ARMAMENT DROP-IN TRIGGER:

    ∙       3.5 LBS SINGLE STAGE 

    ∙       Flat Design

    ∙       Adjustable trigger pull

     

     

     

     

     

    LUTHAR MBA3 STOCK:

    ∙       Fully adjustable carbine buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – this is our carbine stock

    ∙       additional 1″ height on cheek rest

    ∙       3-axis adjustable butt plate assembly extends additional 1 1/16″ length of pull and includes the following movement:

    1.     horizontal for linear adjustment (i.e. length of pull)

    2.     vertical for a perfect butt plate fit into the curvature of the shoulder.

    3.     lateral adjustment for a ½ inch left or right cast

    4.     this butt plate assembly is interchangeable with the original mba-1 buttstock

    ∙       Includes a picatinny rail on the bottom rear of the stock body to attach your choice of many accessories.

    ∙       Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. this also allows you to secure the stock in your favorite position.

    ∙       The black mba-3 comes with a medium soft rubber recoil pad, duro 85.

    ∙       The LUTHAR mba-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.

    ∙       Fits all .223 and most .308 AR carbine style rifles

    ∙       Super strong glass filled nylon

    ∙       Easy to replace and quick to install

    ∙       Uses 4 out of the 6 positions on a mil-spec or commercial tube

     

    FEATURES:

    ∙       ergonomic

    ∙       adapts to existing commercial and mil-spec buffer tubes

    ∙       certain aftermarket commercial buffer tubes that exceed 1.172″ may not fit

    ∙       the vertical struts for the MBA 3 are fixed therefore the cheek pc is not reversible like the MBA 1 however the cheek piece itself is designed with a cheek pad for the lefty

     

     

    44” PELICAN 1720 Flight Case:

     

    • Made from tough light-weight polypropylene copolymer

    • Has a rugged o-ring seal that makes it air and water tight up to 3ft deep

    • Custom laser cut foam to hold all components fo the system firm in place and provide maximum protection. 

    • Utilize an automatic pressure release valve so that it adjusts to its environment

    • ATA/TSA ready for airline travel

    • Lockable with comfort molded handles and spring loaded latches

    • include heavy-duty off-road wheels and a second handle. 

    • Made in the USA

    • LASER CUT AND ENGRAVED FOAM INSERTS

     

    Vortex VENOM 2-25X56 MOA RIFLE SCOPE

    Take the first step into long-range shooting with an optic that helps you go the distance with a ton of shooter-friendly features. Featuring a 5x mag range built into a 34mm tube for a massive amount of turret travel, the Venom® also includes our RevStop™ Zero System for a fast, easy, reliable return to zero. The EBR-7C, First Focal Plane reticle gives you accurate holds at any magnification, and an included throw lever allows for fast transitions between magnifications. It’s the quickest way to get your rifle out to 1,000 yards and beyond at a price that lets you go deep for less

     

     

    Magnification 5-25x

    Objective Lens Diameter 56 mm

    Eye Relief 3.6 inches

    Field of View 21.2-4.7 ft @100 yds

    Tube Size 34 mm

    Turret Style Exposed Tactical

    Adjustment Graduation 1/4 MOA

    Travel Per Rotation 25 MOA

    Max Elevation Adjustment 85 MOA

    Max Windage Adjustment 85 MOA

    Parallax Setting 15 yards to infinity

    Length 15.3 inches

    Weight 35 oz.

     

     

    AD-RECON-M MEDIUM HEIGHT SCOPE MOUNT-TITANIUM LEVERS 

     

     

    The AD-RECON-M mount with Titanium Levers is made for putting high power glass onto a flattop style AR-15. Designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or for shooters requiring a higher cheek weld for heads up shooting. This is the mid-height mount that we offer, the centerline height with 34mm rings is 1.63" and 1.7" with 34mm rings. The cantilever throws the scope out front with 2″ offset, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented Titanium QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.

     

    BT46-LW17 PSR Atlas Bipod: Standard height with ADM 170-S Lever


    The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.

    It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.

    Selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System. NSN 1005-01-663-0038

    • Height Range: 5.2 - 9.6" (6.8” at 90°)

    • Preloaded Pan: 30 degrees

    • Preloaded Cant: 30 degrees

    • Position Button 0.5" diameter

    • Fore and Aft pivot limiting Bosses

    • 5 leg positions: 0, 45, 90, 135 & 180 degrees

    • Non-Rotating Legs: outer leg does not rotate around inner leg

    • Larger, stronger inner legs

    • Weight: 13.61 ounces approx.

    • Footprint: 8–11"

     

     

    BT30-C: Coyote Brown Atlas Bipod Pouch

    The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.

    It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.

     

    BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

    The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553

    • Elevation Range: 3.75 – 4.65”

    • Folded Length: 3.85" approximate

    • Weight: 7.4 ounces



     

     

    VORTEX TORQUE LIMITER WRENCH

    Tighten to the specified torque and not a smidgen more! Adjustable in 1 in/lb increment, this tool is easy to read, simple to set, and offers fast, accurate tension whenever and wherever you need it.

    Included in the Box

    • 5 Hex Bits

    • 9/64"

    • 3/16"

    • 2 mm

    • 2.5 mm

    • 3 mm

    • 3 Torx Bits

    • T10

    • T15

    • T25

    • 1 Screwdriver Bit

    • 10 mm wide

    • 1 Socket

    • 1/2 " Socket

    • 1/4" Socket Adapter

     

     

    CUSTOM COYOTE TAN FULL FRAME CERAKOTE 

    STOCK- BUFFER TUBE – MUZZLE DEVICE – HANDGUARDS – GRIP – UPPER RECEIVERS – LOWER RECEIVER

     

     

    ADDITIONAL INCLUDED PARTS:

     

    • 2 X 10 ROUND PMAG 

     

     

     

     WARRANTY:

     

    This firearm is covered by our lifetime warranty, please read full warranty statement for further details. 

     

     

     

     

    Please email your local FFL information to sales@tacticalskeleton.com after placing your order.


    Reviews

    Tactical Skeleton is a BBB Accredited Gun Dealer in Grand Prairie, TX