• 24" 6.5 CREEDMOOR & 20" 308 WIN CUSTOM AR10 SYSTEM GEN 2

    Free Shipping!


    ·       US made in Scottsdale, Arizona

    ·       T6061 billet

    ·       1913 picatinny rail flat top-DPMS low spec rail height

    ·       manufactured from solid block of billet aluminum

    ·       mil-a-8625 type iii anodizing

    ·       slim profile shell deflector / forward assist

    ·       308 WIN engraved dust cover on 308 upper

    ·       6.5 CREEDMOOR engraved dust cover on CREEDMOOR upper


    ·       24” MATCH GRADE straight fluted bull barrel

    ·       0.936” Stainless Gas Block

    ·       RIFLE length gas tube

    ·       Straight fluted for maximum heat dissipation

    ·       4150 STEEL / CHROME LINED

    ·       5/8x24 muzzle thread pitch

    ·       1:8 TWIST

    ·       M4 feed ramp


    308 WIN BARREL:

    ·       20” MATCH GRADE HBAR barrel

    ·       0.75” Stainless Gas Block

    ·       RIFLE length gas tube

    ·       4150 STEEL / CHROME LINED

    ·       5/8x24 muzzle thread pitch

    ·       1:10 TWIST

    ·       M4 feed ramp



    ·       19.25” Super slim Handguard

    ·       MLOK SYSTEM with three sectional rails installed

    ·       Anodized

    ·       T-markings on top rail

    ·       Ultra-Light weight




    ·       16.5” Super slim Handguard

    ·       MLOK SYSTEM with three sectional rails installed

    ·       Anodized

    ·       T-markings on top rail

    ·       Ultra-Light weight



    ·       Made for 7.62X51 / 308 Cal & 6.5 CREEDMOOR

    ·       HPT/MPI Tested and Marked

    ·       9310 Hardened Steel Bolt

    ·       NICKEL BORON Coating

    ·       17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)

    ·       8620 carrier and gas key.

    ·       Hardened extractor S7 tool steel.

    ·       The group comes fully assembled with properly torqued and staked gas key

    ·       Made in the USA

    (One BCG is included with the AR10 package)


    ·       CROWN style

    ·       side ports for recoil reduction



    ·       CROWN style

    ·       side ports for recoil reduction



    ·       Machined from 7075-T6 aircraft grade billet aluminum

    ·       Matte black hard-coat anodized per Mil 8625 Type 3 Class 2

    ·       Precision broached magazine well with beveled feed lips

    ·       Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors.

    ·       Caliber marking of “Multi” so it can be used with many different caliber uppers

    ·       Compatible with all standard AR-10/.308 components and magazines and most aftermarket parts — Made to DPMS spec

    ·       Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower

    ·       Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)

    ·       Compatible with Norgon and other aftermarket ambidextrous mag releases

    ·       Threaded bolt catch pin (Threaded hole and hardware)

    ·       Integrated large opening “winter” trigger guard

    ·       Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances



    ·       standard milspec trigger


    ·       Fully adjustable carbine buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – this is our carbine stock

    ·       additional 1″ height on cheek rest

    ·       3-axis adjustable butt plate assembly extends additional 1 1/16″ length of pull and includes the following movement:

    1.     horizontal for linear adjustment (i.e. length of pull)

    2.     vertical for a perfect butt plate fit into the curvature of the shoulder.

    3.     lateral adjustment for a ½ inch left or right cast

    4.     this butt plate assembly is interchangeable with the original mba-1 buttstock

    ·       Includes a picatinny rail on the bottom rear of the stock body to attach your choice of many accessories.

    ·       Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. this also allows you to secure the stock in your favorite position.

    ·       The black mba-3 comes with a medium soft rubber recoil pad, duro 85.

    ·       The LUTHAR mba-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.

    ·       Fits all .223 and most .308 AR carbine style rifles

    ·       Super strong glass filled nylon

    ·       Easy to replace and quick to install

    ·       Uses 4 out of the 6 positions on a mil-spec or commercial tube



    ·       ergonomic

    ·       adapts to existing commercial and mil-spec buffer tubes

    ·       certain aftermarket commercial buffer tubes that exceed 1.172″ may not fit

    ·       the vertical struts for the MBA 3 are fixed therefore the cheek pc is not reversible like the MBA 1 however the cheek piece itself is designed with a cheek pad for the lefty


    44” Flight Case:


    ·        Made from tough light-weight polypropylene copolymer

    ·        Has a rugged o-ring seal that makes it air and water tight up to 3ft deep

    ·        Custom laser cut foam to hold all components fo the system firm in place and provide maximum protection.

    ·        Utilize an automatic pressure release valve so that it adjusts to its environment

    ·        ATA/TSA ready for airline travel

    ·        Lockable with comfort molded handles and spring loaded latches

    ·        include heavy-duty off-road wheels and a second handle. 

    ·        Made in the USA


    Vortex Crossfire II 3-12x56 Scope:



    ·        Fully Multi-Coated Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.

    ·        Second Focal Plane Reticle           Scale of reticle maintains the same ideally-sized appearance. Listed reticle sub tensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification.

    ·        Illuminated Center Dot Provides a precise aiming point under low-light conditions.


    ·        Tube Size  30 mm diameter.

    ·        Single-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness.

    ·        Aircraft-Grade Aluminum   Constructed from a solid block of aircraft-grade aluminum for strength and rigidity.

    ·        Waterproof O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments.

    ·        Fog-proof  Nitrogen gas purging prevents internal fogging over a wide range of temperatures.

    ·        Shockproof Rugged construction withstands recoil and impact.

    ·        Hard Anodized Finish        Highly durable low-glare matte finish helps camouflage the shooter's position.

    ·        Capped Reset Turrets       Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret.

    ·        Adjustable Objective          Adjustment for riflescope's objective lens provides image focus and parallax removal.



    ·        Magnification         3-12 x

    ·        Objective Lens Diameter   56 mm

    ·        Eye Relief  3.5 inches

    ·        Field of View          36.7-9.2 feet/100 yards

    ·        Tube Size  30 mm

    ·        Turret Style            Capped

    ·        Adjustment Graduation      1/4 MOA

    ·        Travel per Rotation 15 MOA

    ·        Max Elevation Adjustment 60 MOA

    ·        Max Windage Adjustment  60 MOA

    ·        Parallax Setting     10 yards to infinity

    ·        Length       14.3 inches

    ·        Weight       21.1 ounces

    Comes with one piece quick detach picatinny mount pre-installed







    ·        2 X 10 ROUND PMAG






    This firearm is covered by our lifetime warranty, please read full warranty statement for further details.





    Please email your local FFL information to sales@tacticalskeleton.com after placing your order.